Lan Patch Cable

A LAN patch cable is a short-distance network cable used to connect network devices such as computers, switches, routers, and hubs. It enables connections between network devices, builds a LAN, and allows data to be quickly transmitted within the LAN.

Low Signal Attenuation
Compared with ordinary patch cords, our LAN patch cables have lower signal attenuation, with an attenuation of no more than 20dB/100m within a length of 100 meters, which is much better than the industry standard. This means that data packets can maintain integrity even in longer distance transmissions.

Strong Durability
The outer sheath of the LAN patch cable is made of high-strength PVC material, with a tensile strength of 150N, which is 1.5 times that of ordinary PVC. The cable has passed more than 7,000 bend tests, far exceeding the industry standard of 3,000 times. This can effectively avoid network interruptions caused by wire breakage.

Good Shielding
The LAN patch cable uses double-layer shielding including aluminum foil shielding and high-density braided shielding. In the frequency range of 1-100MHz, the shielding effectiveness (SE) of our equipment exceeds 85dB, which is 20dB higher than ordinary shielded cables. Therefore, our equipment can more effectively block external electromagnetic interference and radio frequency interference, preventing the signal from being weakened during transmission.

Safe And Harmless
The LAN patch cord strictly complies with RoHS and REACH standards, and the heavy metal content is less than 1000ppm. In addition, it uses halogen-free materials, with a chlorine content of <900ppm and a bromine content of <900ppm, which is far lower than the 3000ppm limit of the halogen-free standard. This means that this patch cord will not release toxic substances during the aging process, which is safer for workers who have long-term contact with the cable.

Q: What is the difference between shielded and unshielded lan patch cable?

The difference between shielded and unshielded network cables lies in whether there is a shielding layer. The shielded network cable has a shielding layer, which can reduce electromagnetic interference and is suitable for network transmission in high interference environments, such as hospitals and television stations. The unshielded network cable has no shielding layer and is suitable for ordinary home, office and other network environments. The price of shielded network cables is relatively high, and it does not have a significant impact on the general network environment. Therefore, in ordinary network environments, unshielded network cables are mostly used.

Q: What is a lan patch cable with Crystal Head? What is the difference between network jumper and network cable?

Network patch cord is a type of cable used to connect devices, typically used to connect different network devices in a computer network, such as routers, switches, hubs, etc. Jumpers usually only have a small amount of wire, with a standard length of less than one meter and a maximum length of no more than ten meters.

A network cable is a type of cable that transmits digital signals and is commonly used to connect devices in computer networks, such as computers, routers, switches, hubs, etc. Network cables generally have four pairs of wires, with a standard length of 100 meters.

The main difference between patch cords and network cables is their length and purpose. Jumpers are used to connect devices for short distance transmission, while network cables are used to connect devices for longer distance transmission.

The method of determining jumper and network cable is to distinguish them by their length and connection object. Usually, if network devices such as routers, switches, etc. are connected, jumper cables are used; If the connection is to a computer, etc., a network cable is usually used. In addition, patch cords are usually shorter in length, while network cables are longer in length.

In addition, jumpers can also be divided into direct jumpers and cross jumpers. Direct patch cords are used to connect the same device, such as the connection between routers; Cross jumpers are used to connect different devices, such as routers and switches. When selecting a jumper, it is important to pay attention to the type of device connected and the type of jumper.

It is worth noting that patch cords and network cables come in different categories and specifications, such as Cat5, Cat6, Cat7, etc. Different specifications are suitable for different network needs. When selecting jumpers or network cables, it is necessary to determine the specifications that are suitable for the current network requirements.

Hot Tags: lan patch cable, China lan patch cable manufacturers, suppliers, , CAT6A UTP FTP Patch Cord