EPON Fiber ONU

HG8245C EPON Xpon Fiber ONU is suitable for Huawei HUAWEI Chinese English ONU/ONT Universal XPON/GP/EP Gigabit Fiber ONU

EchoLife HG8245 EPON Fiber ONU is a high-end gateway type home side device of Huawei's FTTH solution, which achieves ultra wideband access for home/SOHO users through G/EPON technology; Provide 2 POTS voice interfaces, 4 GE/FE adaptive Ethernet ports, and Wi Fi interfaces to effectively ensure the business experience of voice, data, and high-definition video through high-performance forwarding capabilities.

• Interface type: 2POTS+4GE+1USB+Wi Fi.
• Flexible application: Supports G/EPON dual-mode adaptation to meet different FTTH network access requirements; Supports both SIP and H.248 protocols, making it easy to interface with softswitches.
• Plug and play: supports remote automatic distribution of voice, broadband, multicast and other services through OMCI/OAM protocol and TR069, without on-site configuration.
• Remote diagnosis: Supports external testing, call simulation, and PPPoE dial-up simulation for easy remote fault location.
• High speed forwarding: The second layer forwarding has GE line speed, and the third layer NAT forwarding performance reaches 900M.
• Green Energy Saving: Adopting highly integrated SOC chips, the single-chip integrates PON, voice, gateway, and LSW modules, saving 25% energy.

1, HG8245 EPON Fiber ONU default account password:
Account: telecomadmin
Password: admintelecom or nE7jA% 5m.
2, Wireless network setup method:
1. Connect the wireless router to the optical modem. Connect one end of a network cable to Ethernet port 1, Ethernet port 3, or Ethernet port 4, and the other end to the WAN interface of a wireless router;
2. Connect the wireless router to the computer. Connect one end of a network cable to the wireless router LAN interface and plug the other end into a computer.
3. The default address of the optical modem is 192.168.1.1, so the LAN port of the wireless router needs to be configured with an address from another network segment;
4. Configuration method: Log in to the wireless router, set the IP to 192.168.2.1 (after accessing the wireless router, it is http://192.168.2.1 );
5. Subnet mask: 255.255.255.0 Save;
6. WAN port settings. From the network parameters of the wireless router - WAN port settings - WAN port connection type: select dynamic IP;
After completing the above steps, you can access the internet through the router;
8. Now set the wireless internet parameters;
9. Wireless parameters - Basic settings - SSID number: Choose any name - Check to enable wireless function - Allow SSID broadcast - Enable security settings - Set your own password;
10. Modify the login password for the wireless router: System Tools - Modify Login Password - Custom Settings;
11. Restart the router, both wired and wireless internet access are now available.
Attention:
Accessing a wireless router is http://192.168.2.1 ;
After setting up, you need to restart the router.

Hot Tags: epon fiber onu, China epon fiber onu manufacturers, suppliers, fiber optic terminal device, high performance onu, onu for internet, stable onu, cost effective onu, fiber optic access device