Fiber Optical ONT

The GPON fiber optical ont F660 for home users is designed specifically for fiber to home (FTTH) scenarios and supports desktop and wall mounting.

It is equipped with 4 GE interfaces, 2 voice interfaces, 1 USB 2.0 interface, and an IEEE802.11 b/g/n (2x2) Wi Fi interface with two external antennas.

1. Open the Telnet function under Windows 7. (Control Panel ->Program)

2. Windows Start Run (or Win+R combination) Enter cmd

3. Enter telnet 192.168.1.1 and press enter

4. Login: root

5. Passowrd: root or Zte521

6. Seeing # appear indicates entering the command line of the router

7. Enter sendcmd 1 DB p UserInfo

1. Browser input http://192.168.1.1

2. Log in with the super username and password obtained earlier

Home users can easily access voice services, video services, and many other types of high-speed broadband services through rich connections.

● High reliability

Highly reliable heat dissipation design ensures stable operation

Dual versions ensure uninterrupted business during software downloads or upgrades, thereby improving software reliability

● Green design

Automatically switch to energy-saving mode based on the idle state of the port, in compliance with CE, RoHS, and WEEE standards

● More flexible management

Completely OMCl compliant with ITU-TG.988 standard

OMCI and TR-069 management in accordance with BBFTR-142 framework

Q: How to configure ZTE F660 fiber optic modem and router?

Installation/setup method:

1. Connect the network cable from any LAN port of the fiber optic modem to the WAN port of the wireless router, and then connect the network cable from the LAN port of the wireless router to the computer. The computer will automatically obtain the IP address and DNS settings for local connection;

2. After powering on the wireless router, log in to the wireless router with your phone or computer, change the LAN port address of the wireless router to 192.168.2.1 to avoid conflicts with the optical modem LAN port address. Save and restart the wireless router;

3. Open the browser on the computer, enter 192.168.2.1, press enter, enter the default login username and password for the wireless router, and enter the wireless router settings interface;

4. The next step in the setup wizard is usually to choose ADSL Virtual Dialing (PPPOE) method for household use. Next, enter the internet account and password provided by the network provider. Next, set the wireless network name in the SSID box, select WPA-PSK/WPA2-PSK encryption method, enter a wireless password of at least 8 digits. Next, save and restart the wireless router to complete the installation.

Q: What about adding a wireless router to ZTE F660?

ZTE F660 adds a wireless router setting method: Set up a level 2 router. The connection method for two routers is modem: modem - router 1wan port; Router 1lan port - Router 2wan port; Router 2lan port - computer.

Firstly, connect the Ethernet cable on the modem end to the WAN interface on the router (which is usually colored or positioned differently from several other interfaces with the same appearance). Additionally, prepare a network cable to connect to any of the four LAN ports, with the other end connected to the computer network port.

After setting up, connect one end of the network cable to the LAN port of the ZXHN F660 Telecom Cat and the other end to the WAN port of the wireless router.

ZXA10F660 is a light cat. It should be connected to a wireless router and ready to use. The AP function can be implemented, and the settings only need to be set in the wireless routing.

Q: What does ZTE Light Cat Light Signal Flash Red Light mean?

If the light signal light turns red or flashes, it indicates that the fiber optic signal cannot be received, usually due to the following situations:

【1】 The optical interface of the optical modem is faulty and needs to be replaced;

【2】 The indoor tail fiber connection light cat joint is loose, just plug in the joint to restore it;

【3】 Some indoor optical fibers have excessive bending. Excessive bending of optical fibers can affect the total reflection transmission of light signals within the fiber, as long as the fiber is straightened;

【4】 The outdoor optical fiber is broken or the optical port of the computer room equipment is faulty. It is necessary to contact the staff for troubleshooting.

Q：Is ZTE F660 Fiber Optical ONT Gigabit?

It's gigabit. The F660 Fiber Optical ONT can be used for gigabit fiber broadband and comes with a wireless router, but only the Lan1 port supports gigabit output, while the rest can only support 100Mbps output.

Hot Tags: fiber optical ont, China fiber optical ont manufacturers, suppliers, ONU For Optical Fiber, rack mounted onu, poe onu, XPON Fiber Router, onu with multiple ports, 16 port onu