The Hg8245h5 Router supports 4LAN+2POTS+2.4G WiFi with a fiber port offering 2.5Gbps downstream and 1.25Gbps upstream rates. It features plug-and-play deployment, remote diagnosis, link monitoring via Ethernet OAM, high-speed forwarding at 900Mbit/s in NAT scenarios, and IPv6/IPv4 dual stack capability. Its compact design and reliable performance suit FTTH, FTTx, and FTTB networks.Which mainly exports to the United States, Mexico, and Brazil, with a customer satisfaction rate of 98%, making them a reliable partner
Products Specification
| Product Description | |
| Model Number | Hg8245h5 Router |
| Specification | 4FE+2POTs+WiFi |
| WIFI signal | 2.4GWiFi |
| Wireless gain | 3db |
| USB | USB2.0 |
| LAN | 4*10/100Mbps active ports, full/half duplex, RJ45 interface |
| POT | H248/Sip Voice protocol |
| SUPPORT | PPPOE,Route,Bridge,WAN IP Access,Muti SSID |
| Firmware | English |
| Dimension/weight | 155mm*125mm*30mm/222g |
| Fiber port |
1 XPON GPON EPON interface, ingle-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Fiber interface | SC/UPC/APC Dual mode/Singal mode |
| RX sensitivity | >-28dBm (1490nm) |
| DC power | 12V 1.0A, external AC-DC power adapter |
| Button | Reset,power,WPS,Wireless |
| Operation | Working temperature: -5- +55℃ working humidity:10-90%(non-condensation) |
| Storage | Storage temperature: -30℃- +60℃ storage humidity: 10-90%(non-condensation) |
| Feature | |
| 1.Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required. | |
| 2.Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulati | |
| 3.Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM. | |
| 4.High speed forwarding: 900 Mbit/s forwarding in the NAT scenario. | |
| 5.IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite. |
Main Functions & Features
FTTH High-Speed Access: Hg8245h5 Router uses GPON technology to provide ultra-broadband access for home users, with Layer 2 and Layer 3 forwarding achieving 1 Gbit/s upstream and 2 Gbit/s downstream.
Comprehensive Interface Configuration:
4 Gigabit Ethernet Ports (GE/FE): Allows for high-speed wired connections to devices like PCs and Set Top Boxes (STBs).
2 POTS Ports: Supports VoIP (Voice over IP) for voice services.
1 USB Port: Supports FTP-based network storage, SAMBA for file sharing, and DLNA functions.
Wi-Fi Connectivity: Built-in 2.4 GHz Wi-Fi (802.11b/g/n) with 2x2 MIMO.
Smart Operations & Maintenance (O&M): Supports automatic provisioning of services (voice, data, video) through OMCI and TR-069, eliminating the need for on-site configuration.
Remote Diagnosis: Includes features like loop-line testing on POTS ports, call simulation, and PPPoE dial-up emulation to quickly locate faults.
Energy Efficiency: Uses a highly integrated System on a Chip (SoC) that combines PON, voice, and gateway modules, reducing power consumption by 25%.
Quality of Service (QoS): Supports Ethernet port rate limitation, 802.1p priority, and SP/WRR/SP+WRR scheduling.
Security: Features a built-in firewall, filtering based on MAC/IP/URL addresses, and protection against unauthorized access.
Technical Specifications
Dimensions: 30 mm x 168 mm x 115 mm (without antenna and pads)
Weight: ~155g–220g
Operating Temp: 0°C to +40°C
Power Supply: 11–14 V DC, 1 A
Products Recommend
FAQ
How to solve common problems with the Hg8245h5 Router?
Here are two of the most common self-check steps:
Unable to access the internet or frequent network drops:
Check the line connection: First, confirm that the fiber optic plug on the back of the device is firmly inserted and that the fiber optic cable has no obvious bends or damage. Then, check that the network cable connecting the LAN port of the optical modem to the computer or router is secure.
Check the indicator light status: Observe the indicator lights on the front of the device. Under normal circumstances, the "PON" or "Network E/G" indicator light should be solid or green, indicating that the fiber optic signal registration is normal. If this light is flashing or not lit, it is usually a problem on the line or the operator's side, and you need to contact your broadband service provider for repair.
Restart the device: Try turning off the device power, waiting for 1 minute, and then turning it back on. A simple restart can solve many temporary software or cache problems.
Weak or slow Wi-Fi signal:
Optimize placement: The Hg8245h5 Router is usually installed inside a home information box (weak current box). The metal box door can severely block and weaken the wireless signal. It is recommended to move the device out of the low-voltage box, or at least keep the box door open, and place it in a central location in the home, avoiding proximity to sources of interference or obstacles such as microwave ovens or load-bearing walls.
Consider using an external router: The main function of the optical modem provided by the operator is photoelectric conversion, and its built-in Wi-Fi performance is usually limited. If your home is large or you have high requirements for wireless network performance, it is more recommended to set the HG8245H5 to bridge mode and then connect a more powerful independent wireless router to handle whole-house Wi-Fi coverage. This is an effective solution for obtaining a high-quality wireless experience.
Hot Tags: hg8245h5 router, China hg8245h5 router manufacturers, suppliers, onu with multiple ports, 32 port onu, onu for internet, compatible onu, onu for fiber network, flexible onu
