CAT6A Network Cable

Cat6A Network Cable, also known as 6A lan cable, can support 10 Gigabit Ethernet (10Gbps) and currently can reach a maximum of 500MHz, which is more than twice the size of Category 6 cables. Category 6 cables can only support up to gigabits (1Gbps). The transmission speed of a 10 Gigabit Ethernet cable is 10 times faster than that of a gigabit one.

At present, 6A is divided into two types: unshielded and shielded. Unshielded cables are similar in appearance to Category 6 network cables, but the details are more obvious. The lay distance of Cat6A Network Cable is denser, and the conductors are also thicker. The main focus is on the outer sheath of PVC. Traditional PVC is smooth, and 6A uses a gear shaped cable groove shape to effectively change the signal enhancement and minimize signal attenuation. Another type of shielding is the 6A network cable, which adopts a pair shielding structure, which is very different from traditional shielding. This pair shielding can prevent interference from other wire cores without a pair of wire cores. It can not only prevent external interference but also minimize its own signal attenuation value. However, the cost is relatively high, and overall, the market demand is more

The Class 7 network cable is almost identical to the Class 6 A shielded network cable, and can also support transmission at 10 Gigabit (10G) speed. It has pair shielding and a layer of woven mesh outside, making its performance even more powerful. However, there is currently no detailed standard test data for the entire Class 7 system, and its matching RJ45 module and crystal head have not been fully standardized. 

• Gigabit Ethernet: Compared to fiber optic patch cables, Category 6a cables support Gigabit Ethernet transmission at a lower cost and up to 100 meters, making them the preferred choice for new cabling systems.
• PoE: Category 6a cables support PoE (Power over Ethernet) without the risk of line interruption.
• Wireless Networking: Category 6a cables can be used for wireless access point cabling, meeting market demand for high-bandwidth networks.
• HDBaseT Connection: When connected to an HDBaseT port, Category 6a cables deliver optimal performance compared to Category 5e and Category 6 cables for transmitting high-bandwidth signals, such as 4K Ultra HD, over distances of up to 100 meters.

CAT6A Network Cable connection method

Preparing a CAT6A Network Cable primarily involves the following steps:

1. Preparation
Prepare the Category 6a network cable and RJ45 connector. The wire diameter of the CAT6A Network Cable is 0.6mm (23AWG), slightly thicker than regular Category 6 cable. A cross-shaped isolation frame is placed between the four twisted pairs within the cable, helping to stabilize the pairs, improve signal balance, and effectively reduce crosstalk and signal attenuation.

2. Stripping the Cable: Use wire strippers to strip the cable jacket. The recommended length is approximately 13–15mm. Be careful not to damage the insulation on the inner core.

3. Organize and Arrange the Cables
Separate and straighten the four exposed twisted-pair cables, and arrange them according to the T568B standard order, from left to right:
- White/Orange
- Orange
- White/Green
- Blue
- White/Blue
- Green
- White/Brown
- Brown

4. Press the RJ45 connector
Cut the arranged cables evenly, leaving about 12mm of space. Insert the RJ45 connector, ensuring that each wire core is firmly seated under the corresponding metal contact. Finally, use network cable pliers to firmly press the RJ45 connector to securely connect the RJ45 connector to the wire core.

5. Test Connectivity
After pressing, it is recommended to use a network tester to check the continuity of the eight wire cores to ensure there are no mismatches, loose connections, or open circuits to ensure a stable network connection.

Hot Tags: cat6a network cable, China cat6a network cable manufacturers, suppliers, 1000FT CAT6 Ethernet Cable, CAT6 UTP Network Cable, CAT5A Lan Cable, CAT6 UTP Lan Cable