8010H Fiber ONU is a network device installed at the user end, which is used to convert the fiber broadband signal provided by the operator into a network signal (such as Ethernet) that the user can use.
Product Features
Fast Transmission Speed
The 88010H Fiber ONU uses GPON technology, with a download speed of up to 2.488Gbps and an upload speed of 1.244Gbps, which is about 1.5 times faster than ordinary fiber broadband devices. This speed means that even if users are watching 4 channels of 4K ultra-high-definition video (each video requires about 25Mbps bandwidth) and downloading multiple large files at the same time, the network will still be smooth and not stuck.
Diversified Interfaces
In addition to the fiber interface, the 8010H fiber access terminal also provides a 10/100/1000Mbps adaptive Ethernet port. This Ethernet port can be directly connected to a computer, TV, or a wireless router to transmit Wi-Fi signals. Compared with some devices that only have fiber ports, our devices are more compatible and can meet more scene requirements.
Receiving Sensitivity
The 8010H fiber access terminal uses a PIN photodetector, and its receiving sensitivity can reach -28dBm (1490nm). In contrast, some products on the market only support -26dBm or -27dBm sensitivity. Since the fiber network may cause signal attenuation due to splitting, connection loss, etc., using our equipment can reduce the dropout or rate reduction caused by signal attenuation.
Products Specification
|
Model |
8010H Fiber ONU (Custom LOGO) |
|
Fibre port |
1 GPON interface, SC single-mode/single-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
|
Wavelength |
Tx 1310nm, Rx 1490nm |
|
Fibre interface |
SC/PC SC/APC |
|
RX sensitivity |
<-28dBm (1490nm) |
|
WLAN |
IEEE802.11b/g/n, 300Mbps, a built-in antenna |
|
LAN |
1*10/100/1000Mbps adaptive Ethernet ports, full/half-duplex, RJ45 interface |
|
Throughput |
Throughput can reach 900Mbps or more |
|
DC power |
12V 1A, external AC-DC power adapter |
|
Button |
Reset, power |
|
Power |
≤8W |
|
Operation |
Working temperature: -5-+55℃ working humidity: 10-90% (non-condensation) |
|
Storage |
Storage temperature: -30℃-+60℃ storage humidity: 10-90% (non-condensation) |
|
Dimension |
130*105*30mm (length*width*height) |
|
Net weight |
≤0.2Kg |
Products Recommend
FAQ
1. What are the default login username and password of 8010H Fiber ONU?
A: The default login username and password are printed on the label on the bottom of the device. This is the most accurate way to determine the correct login username and password, as devices may vary between carriers and batches. Common default combinations include:
* Username: `telecomadmin` Password: `admintelecom`
* Username: `root` Password: `admin`
2. Does it support 100Mbps broadband?
A: Absolutely. In fact, all fiber optic modems (ONUs) on the market support at least 100Mbps broadband. As a basic access device, this device should have no problem meeting 100Mbps speeds.
3. How do I restore the 8010H Fiber ONU device to factory settings?
A: There is usually a small "Reset" button on the side or back of the device. While the device is powered on, use a pointed object such as a SIM card reader or toothpick to press and hold the button for about 10 to 15 seconds. Release the button when all indicators flash or turn off. The device will restart and restore to factory settings.
[Important Notice] Use the reset function with caution! Performing a factory reset will erase all pre-installed network configuration data (such as LOID, VLAN, etc.) from your carrier, resulting in internet access failure. If this is an error, you'll need to contact customer service at your broadband carrier (China Mobile, China Telecom, or China Unicom) to have the installation technician reconfigure the data before the network can be restored.
4. Is it a Gigabit or 100Mbps device?
A: The Huawei HG8010H Fiber ONU is a Gigabit optical modem. It features a single 10/100/1000Mbps auto-sensing Ethernet port, supporting Gigabit broadband access.
The Huawei HG8010 series is a very common early bridge-type single-port optical modem. It was widely used during the early days of fiber optic adoption (roughly 2009 to 2013). This series has undergone several iterations:
The first and second generation models (such as some HG8010s) featured 100Mbps ports.
The third and fourth generation models were upgraded, with the HG8010C and HG8010F still featuring 100Mbps ports, while the HG8010H is a Gigabit version. Nowadays, these single-function bridge modems are gradually being replaced by more comprehensive smart home gateways (HGUs)
Hot Tags: 8010h fiber onu, China 8010h fiber onu manufacturers, suppliers, isp onu, fiber to the premises onu, 8 port onu, AN5506 02B Fiber ONU, 48 port onu, telecom onu
