Product Introduction
Miller fiber strippers are pliers used to remove the outer protective coating of optical fibers.
Product Features
Precise Stripping
Compared with ordinary flat-mouth strippers, Miller fiber strippers use V-shaped knife grooves, which can wrap the optical fiber 360 degrees around the stripping process, thereby ensuring uniform force and consistent cutting depth. This avoids the problem of poor coating stripping, fiber core damage or eccentric cutting caused by uneven force.
Strong Durability
The surface of Miller fiber strippers is anodized, with a hardness of HV 600, and the wear resistance is three times higher than that of untreated strippers. Therefore, our strippers are still sharp after 100,000 stripping operations. In contrast, ordinary strippers will not be stripped cleanly, accurately or even damage the optical fiber due to blunt or deformed blades when they are used about 30,000 times.
Ergonomic Design
The handle of Miller fiber stripper adopts an ergonomic arc design, with a length of 125mm and a grip angle of 15°, which can fit the hand shape of 95% of users. At the same time, the surface of the handle is covered with TPE rubber material with an anti-slip coefficient of 0.8, allowing users to hold it stably even in an environment with 80% humidity.
FAQ
Q: What about Miller optical stripper lifespan?
Service life: >2000 times.
Miller pliers service life:>2000 times. Miller pliers can be used for at least 3 months based on frequent use of 20 times a day. Daily cleaning and maintenance are recommended, and small storage boxes should be used for separate storage.
Miller pliers are commonly known as fiber coating stripping pliers; Please use the coating stripping pliers correctly as they guarantee the quality of fiber termination.
Q: Fiber optic tool Miller stripper always cut fibers, how to repair them?
Miller stripper are repairable and have a screw. Feel the diameter of the pliers by adjusting the height. If you break it with just one card, it means that the 0.25 protective layer of the opening is too small. You can increase it a bit. Gradually try adjusting it bit by bit.
Hot Tags: miller fiber stripper, China miller fiber stripper manufacturers, suppliers, Fiber Cleaver Kit, Optical Light Source and Power Meter
